* This filament has good color consistence and has a specified shelf life of up to 6 months after opening and 1 year if unopened.
* Comes in vacuum sealed packaging with desiccant. CR PLA is also cold resistant while standard PLA is not.
* TECHNICAL SPECIFICATION
* MATERIAL: CR-PLA
* DIMENSION: 25.5CM*12CM*23CM
* DENSITY: 1.25±0.05g/gm³
* MELT FLOW RATE: 5-7g/min (190 degrees 2.16kg)
* WATER ABSORPTION: 0.5%
* TENSILE STRENGTH: ≥60MPa
* FLEXURAL MODULUS: ≥60MPa
* ELONGATION AT BREAK: ≥3.0%
* DIAMETER: 1.75mm
* BUBBLE: 100% no bubbles
* COIL DIAMETER: 200mm
* COIL HEIGHT: 66mm
* COIL INNER DIAMETER: 56mm
* TEMPERATURE: PLA no heated bed
1. Good Printing Effect
2. Dimensional Stability
3. Non-toxic
4. Wear Resistance, High Impact Strength
5. Tough hard
6. Eco-Friendly Filament
7. Smooth Printing
8. Good glossy surface
Average Rating: 4.0 (1 Review) 80% Recommended
